How much horsepower does a stock 289 engine have?
Table of Contents
How much horsepower does a stock 289 engine have?
Ford’s 289 High Performance V-8 introduced in 1963 and first available as a Mustang option in 1964 is a high-revving, peppy Ford V-8 with a factory rating of 271 horsepower.
What Ford cars had a 289 engine?
The 289-4V was also the engine for the first Australian Ford Falcon GT, the XR Falcon GT.
What does 289 C code mean?
The code refers to the fifth character of the car’s VIN (vehicle identification number), and denotes the engine the car was fitted with when it left the factory. The most common are C and A, both of which refer to the 289 cu in (4.7-litre) V8 engine with either a two- or four-barrel carburettor.
What is a Ford 289 K code?
The K-Code refers to the Mustangs 289-cubic inch V8 engine. The name was given to the engine due to the K in the fifth position on the car’s chassis number. The 289 K-Code was different due to its upgraded pistons, lifter heads, connecting rods, carburettor and cylinder heads.
What was the last year for Ford 289 engine?
Available within a couple of months of the April 17th Mustang debut, and lasting through 1967, it was this engine which made Mustang more than just a pretty face; more than a sporty looking secretary’s car. Simply put, the Hi-Po 289 literally transformed Mustang into a true performance machine.
What is the difference between a code and C code Mustang?
A code – This was the upgrade from a basic V-8. The 255-horsepower engine required premium fuel due to the higher compression. C code – The C engine was the base V-8 Windsor, 200-hp engine for 1965 to 1968. It was the V-8 engine but without the expensive, high-performance upgrades.
Where is the serial number on a 289 engine?
Factory-installed 289 High Performance engines had the vehicle serial number stamped into the righthand side of the block near the battery’s negative-cable attachment point.
How much horsepower does a 289 hipo have?
The standard 4v 289 was factory rated at 225 hp and the hipo was 271 with torque at 300/310 .
How much horsepower does a 65 289 have?
Engine Basics
| Year | 1965-67 “A” Code | 1964 – 1965 “D” Code |
|---|---|---|
| Power (hp) | 225 hp @ 4400 RPM | 210 hp @ 4400 RPM |
| Torque (lb/ft) | 305 lb/ft @ 3200 RPM | 300 lb/ft @ 2800 RPM |
| Compression | 10.0:1 | 10.0:1 |
| Displacement | 289 cu / 4.7 liters | 289 cu / 4.7 liters |
How do I know if my Mustang is K-code?
The K-Code engine was first introduced by Ford in 1963 and was featured in cars such as the Fairlane and the Comet. Each K-Code Mustang had a special badge on their front fenders that read “HIGH PERFORMANCE 289”.
What does R code Ford mean?
racing motor
R-code is Ford lingo for the division’s racing motor. It is powered by the R-Code 427 cubic-inch dual-carburetor factory race engine that produces a whopping 425 horsepower and 480 pound-feet of torque.
What does 2 2 mean on a Mustang?
The 1965 and 1966 Mustang Fastback was marketed as the “Mustang 2+2”, because a fold-down rear seat was included as standard equipment. Where the standard (two-seat) Mustang had a “MUSTANG” emblem, the 2+2 model had a “MUSTANG 2+2” emblem. In 1967, the rear seat became optional, and the “2+2” designation was dropped.
Where is the engine number on a 289 Windsor?
Australian Windsor motors generaly had the number stamped at the rear of the block where the valley cover meets the block.
