Is a Ford Dana 60 the same as a Dodge Dana 60?

Is a Ford Dana 60 the same as a Dodge Dana 60?

These axles are all exactly the same. If there are 4 bolts, then you have either a Dodge or Ford Dana 60 axle. These two axles are not identical.

Are Dana 60 good axles?

High-Pinion Dana 60 The kingpin style is typically considered stronger and more desirable. It’s also more difficult to find and more expensive. Like the low-pinion version, this 60 has unbelievable aftermarket support. You can build a complete axle using all aftermarket components.

How much torque can a Dana 60 handle?

Axletubes vary in size from 3 inches to 3.5 inches in diameter, and Dana lists the GAWR as 5,500 lb-ft for a semi-floating axle, while the full-floaters are good for 6,000 to 6,500 pounds. Both versions have a torque output rating of 5,500 lb-ft.

Are Dana 60 limited slip?

The passenger car version of the Dana 60 came equipped with the Mopar “Powr-Lok” semi-float limited-slip differential option from 1966 to ’69. The Powr-Lok differential used 30-spline axles.

Which is better Dana 44 or Dana 60?

Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling.

How much horsepower can a 9-inch rear end handle?

“They’re good only to 400hp max,” says Tom at Tom’s Differentials. “Anything above that should use today’s beefed-up, redesigned, nodular-iron aftermarket cases. They’re good to 800 hp, if built properly.

Why is a Dana 60 so good?

Why Is The Dana 60 Stronger? Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power.

How strong is a Dana 60 rear end?

The Dana 60 can easily handle drivetrains producing 600 horsepower, and is commonly accepted as the strongest passenger car axle you can find. The Dana 60 is also quite adaptable. Just about any ring and pinion combination you want between 3.54:1 and 7.17:1 is still readily available.

How much horsepower can 31 spline axles hold?

Bolt-on billet aluminum brake registers are machined to size based on your particular brake and wheel requirements. S/S 28- & 31-Spline Axles (28-spline up to 400 hp1, 31-spline up to 500 hp1) For street and handling performance applications, 31-spline S/S axles are recommended.

How much HP can 40-spline axles handle?

A 30-spline axle is rated at 6,200 lb-ft, a 31-spline at 7,000, a 33-spline at 8,200, a 35-spline at 9,600, and a 40-spline at 12,000.