What is Hilti RE 500 used for?

What is Hilti RE 500 used for?

HIT-RE 500 V3 works for post-installed anchoring in dry, wet and water-filled concrete, even if drilled holes are underwater. It is also approved for use in seismic applications.

What is the traditional hole cleaning method to install RE 500 V3?

Traditional cleaning methods comprised of steel wire brushes and air nozzles, 2. Self-cleaning methods using the Hilti TE-CD or TE-YD hollow carbide drill bits used in conjunction of a Hilti vacuum cleaner that will remove drilling dust, automatically cleaning the hole.

How long does it take for Simpson epoxy to cure?

Mixed material in nozzle can harden in 30 minutes at temperatures of 70°F (21°C) and above. Use only appropriate Simpson Strong-Tie mixing nozzle in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair SET-XP adhesive performance.

Does concrete epoxy expire?

Expiration is usually about 2 years after manufacture, so your product is over double the shelf life. On a job site it would be rejected. It may still work or it may not harden properly. My suggestion would be to get a new tube to be safe.

How do I remove Hilti epoxy?

To remove epoxy, aim a heat gun at the epoxy for several minutes, which will soften it so it’s easy to scrape off.

How long does XP take to cure?

For example: SET-XP will take 72 hours to cure at 50 degrees. Also keep in mind that epoxy will not cure in temperatures below 50°. (For colder adhesive installations, consider using an acrylic-based adhesive such as Simpson AT or AT-XP.)

How long is Hilti epoxy good for?

It’s likely fine, I haven’t used that particular type of epoxy before, it would be worth a call to your local hilti rep for a second opinion. That is definitely the expiration. Expiration is usually about 2 years after manufacture, so your product is over double the shelf life. On a job site it would be rejected.

What will dissolve epoxy?

You can use isopropyl alcohol, also known as isopropanol, to remove uncured epoxy resin. Since liquid resin is not yet that hard, removing epoxy with acetone or vinegar also works well.

What happens if epoxy gets on your skin?

By themselves, WEST SYSTEM epoxy hardeners are moderately corrosive. If left in contact with the skin, they can severely irritate it and cause moderate chemical burns. Chemical burns develop gradually and first cause irritation and slight pain. The burn may discolor and slightly scar the skin.

Why is epoxy coated rebar being banned?

Epoxy coated rebar was a trap, and is now being banned around the world. Paradoxically, the epoxy coat can make corrosion worse than the bare steel, let alone galvanised.