Where is the 5/16 mark on a ruler?
Table of Contents
Where is the 5/16 mark on a ruler?
The very first line on the left hand side of the ruler is the 1/16 of an inch mark. Between 0 and 1 inch, there are marks that denote 1/16, 2/16 (or 1/8), 3/16, 4/16 (or 1/4), 5/16, 6/16 (or 3/8), 7/16, 8/16 (or 1/2), 9/16, 10/16 (or 5/8), 11/16, 12/16 (3/4), 13/16, 14/16 (or 7/8), 15/16, 16/16 (or 1) of an inch.
What is 1/6 of an inch on a tape measure?
| INCHES | DECIMAL OF AN INCH | MILLIMETERS |
|---|---|---|
| 1/6 | .1667 | 4.233342 |
| 11/64 | .171875 | 4.365625 |
| 3/16 | .1875 | 4.762500 |
| 1/5 | .2 | 5.080000 |
What is 5/8 on a tape measure?
For instance, if your five ticks past the number 4 tick, then the measurement is 4 5⁄16“. Reading a tape measure is just like reading a ruler….Inch Fraction, Decimal and Millimeter Equivalents.
| Fraction | Decimal | Millimeters |
|---|---|---|
| 5⁄8” | 0.625 | 15.875 |
| 11⁄16” | 0.6875 | 17.4625 |
| 3⁄4” | 0.75 | 19.05 |
| 13⁄16” | 0.8125 | 20.6375 |
What is 5 16th of an inch?
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.313” | 5/16” | 7.95 mm |
| 0.375” | 3/8” | 9.53 mm |
| 0.438” | 7/16” | 11.13 mm |
| 0.500” | 1/2” | 12.70 mm |
How is five sixteenths written?
Answer: 5/16 as a decimal is 0.3125.
What is 5/16 in a fraction?
5/16 = 516 = 0.3125 Spelled result in words is five sixteenths.
How do I read a tape measure?
Put simply 1 = 1″, 2 = 2″ and so on. Between those numbers are a series of shorter marks which represent fractions of an inch. The mark directly in the middle of the inch denotes a measurment of 1/2″ whilst the markings either side of it represent measurements of 1/4″ and 3/4″ respectively.
What are the lines on a ruler?
The markings on a standard ruler represent the fractions of an inch. The markings on a ruler from the start to the 1″ mark are: 1⁄16“, 1⁄8“, 3⁄16“, 1⁄4“, 5⁄16“, 3⁄8“, 7⁄16“, 1⁄2“, 9⁄16“, 5⁄8“, 11⁄16“, 3⁄4“, 13⁄16“, 7⁄8“, 15⁄16“, and 1”.
What’s 5/8 of an inch on a ruler?
Fraction, Decimal, and Millimeter Equivalent Measurements
| Fraction | Decimal | Millimeters |
|---|---|---|
| 5⁄8“ | 0.625 | 15.875 |
| 11⁄16“ | 0.6875 | 17.4625 |
| 3⁄4“ | 0.75 | 19.05 |
| 13⁄16“ | 0.8125 | 20.6375 |
What is 5/8 on a number line?
To mark 5/8; move five parts on the right-side of zero. To mark -1 3/8 i.e. -11/8; move eleven parts on the left-side of zero. To mark -7/8; move seven parts on the left-side of zero. The following diagram shows markings of fractions 3/8, 5/8, -1 3/8, -7/8 on a number line.
