Why is my toilet running after I replaced flapper?
Table of Contents
Why is my toilet running after I replaced flapper?
If you’ve tried replacing the toilet flapper but the toilet still runs, the flush valve seat is probably rough or pitted. You can replace the entire flush toilet flapper valve, but it’s a big job.
How do I know what size flapper I need?
Look at the flush valve drain opening at the bottom of your tank.
- If the opening looks about the size of a baseball or orange, you need a 2″ flapper.
- If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
Why does my toilet keep running periodically?
The Flapper Is Leaking and Needs Replacing Perhaps the most common reason for a running toilet is an old flapper that needs to be replaced. When flappers get old, they don’t seal the way they should, and this allows water to pass constantly from the toilet tank into the bowl.
Why does my toilet keep running intermittently?
A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a “phantom flush.” The cause is a very slow leak from the tank into the bowl. This problem is almost certainly caused by a bad flapper or flapper seat.
Why is my toilet continuously running?
Why does my toilet sound like its running?
Running noises occur when water leaks out of the tank and into the bowl, and then the tank re-fills with water. These noises should cease as soon as the tank is finished filling. Running noises when no one flushes could mean a variety of things: The valve in the tank allows water to escape into the bowl.
Why does toilet run every 5 minutes?
If the toilet keeps running or runs intermittently, you’re not getting a good seal. Try a different flapper if the toilet won’t stop running. If you just can’t find a flapper that seals, consider replacing the entire toilet overflow tube/flapper. On most toilets (two-piece), this means removing the tank.
Are all toilet flappers the same size?
Flappers comes in two sizes, two inch and three inch. A majority of toilets will use the two inch flapper; however three inch flappers have become popular in recent years and can be found in newer toilets manufactured since 2005.
What sizes are toilet flappers?
Most toilets will have a 2-inch drain or a 3-inch drain. Fluidmaster manufactures a standard or universal size of flush valves with flappers and are among the most common flush valves to be used.
